SFP breakout board v1 kit
Product information "SFP breakout board v1 kit"
The Osmocom SFP breakout board is exactly what the name implies: A small break-out board for transceivers in SFP form factor.
You can use it for e.g.
- transmitting your own signals / waveforms (not restricted to Ethernet or CPRI) over fiber optics. This is e.g. useful if you need galvanic isolation between digital circuits, or need long-distance transmission e.g. between FPGA LVDS interfaces.
- attach some I2C adapter to the I2C pins of the SFP module in order to re-program it
The SFP transceivers exhibit a symmetric/differencial interface for Rx and Tx. Each of them is exposed as a pair of SMA connectors, using differential traces between the SMA connectors and the transceiver module.
If you're interested in transmitting single-ended signals, please see the sfp-experimenter board instead. It's like the SFP breakout board, but contains differential transmitter + receivers.
Homepage (includes links to schematics, design files, ...): http://osmocom.org/projects/misc-hardware/wiki/Sfp-breakout
This kit includes:
- Assembled sfp-breakout board (PCB Assembly) like visible on the product pictures
- 4x edge-launch SMA connectors which you still need to solder (very basic soldering skills required)
- 2x 2,54mm jumper
No actual SFP transceiver module is included. You should be able to use any module compatible with the SFP Multi-Source Agreement.
The product does not include a 5V DC power supply. Please see below product links should you want a power supply included:
Login
PSU
This is an AC power cable with an IE320 - C7 plug (for C8 sockets) on the device side, and an EU/European plug for the wall-outlet side. The length is 1.3m.It is compatible with the sysmoBTS 1002 power supply and can be used as a spare part.
This is an AC power cable with an IE320 - C7 plug (for C8 sockets) on the device side, and an US plug for the wall-outlet side. The length is 1.3m.It is compatible with the sysmoBTS 1002 power supply and can be used as a spare part.
This is a desktop-type AC power suppy for 5V DC / 3A output.It is a suitable as a replacement part for the following products:sysmoBTS 1002 (indoor version)But can of courase also be used as accessory for other products likeminiPCIe breakout boardM.2 modem carrier with remote SIM / tracingNOTE: There is no primary AC cable included, please provide one yourself or check the accessories listed below under C7 cablesAC Input100-240V AC, +/-10%, 47-63 HzInput Currrent100V AC: 0.45AInrush currentlimited to 60A peakInput FuseInternal Fuse 3.15A, 250V ACEfficiencyMeets EISA2007, CEC Efficiency Level V,EU (EC) No 278/2009 Phase IOutput Voltage5VOutput Current3A (max)Output Ripple50mV peak-peak (max)MTBF100,000 hours (calculated)Operating Temperature0 to 40 centigrade, no deratingOutput Connector2.5mm barrel type, center contact +Output Cable1.5m +/- 5cmInput ConnectorICE320 - C8