We ship only once per week (see FAQ)!
welcome to the sysmocom webshop!
Only UPS shipping available
welcome to the sysmocom webshop
Filter
sysmoISIM-SJA2 SIM + USIM + ISIM Card (10-pack) with ADM keys
THIS PRODUCT IS END OF LIFE AND HAS BEEN REPLACED BY sysmoISIM-SJA5for a detailed changelog how SJA5 differs from SJA2, see the chapter "Changelog" in the sysmoISIM-SJA5 user manualThis is a bundle of 10 cards.The sysmoISIM-SJA2 is a standards-compliant GSM SIM + UMTS USIM + IMS/VoLTE ISIM card.  It has a triple-cut form factor, fitting 2FF (classic SIM), 3FF (micro SIM) and 4FF (nano SIM).It is intended to be used in sysmoNITB / Osmocom based cellular networks, but can be used with any core network, from GSM (2G) through UMTS (3G) and LTE (4G) as well as 5G.  It contains all files of 3GPP Release 16.All cards ship with factory-default unique IMSI and a card-individual random K + OPC.  The 2G SIM, USIM and ISIM authentication algorithm is set to MILENAGE.One specific advantage of this card is its fully re-programmable nature, where the user can create/edit any files and directories (EF or DF) in the card filesystem.sysmoISIM-SJA2 supports:GSM Authentication: COMP128v1, COMP128v2 and COMP128v3, MILENAGE (default)UMTS Authentication: MILENAGE (default)Fixed ICCID (not programmable/writable!)Programmable IMSIProgrammable MSISDNProgrammable Ki / K / OP or OPC (OPC default)GSM TS 11.11 compatibility64kByte flash sizeJava enabled (Card Manager, OTA, STK/SAT)Card-individual ADM keyCard-individual OTA keys (3DES)For more information on the sysmoISIM-SJA2, please see the sysmoISIM-SJA2 User ManualThe key material will be sent (at the time of shipping) by e-mail to the address submitted during the order/checkout process.NOTICE: This product is for operators of public or private mobile networks and the research community.  As a regular subscriber of mobile networks, you cannot clone another identity to this card, as you do not know the secret identity (Ki) of your original card!THIS PRODUCT IS END OF LIFE AND HAS BEEN REPLACED BY sysmoISIM-SJA5

€80.92*
sysmoISIM-SJA5-9FV SIM + USIM + ISIM Card (10-pack) with ADM keys; 9FV chip
Smart Card Chip: 9FV
This is a bundle of 10 cards.The sysmoISIM-SJA5 is a standards-compliant GSM SIM + UMTS USIM + IMS/VoLTE ISIM card.  It has a triple-cut form factor, fitting 2FF (classic SIM), 3FF (micro SIM) and 4FF (nano SIM).It is intended to be used in sysmoNITB / Osmocom based cellular networks, but can be used with any core network, from GSM (2G) through UMTS (3G) and LTE (4G) as well as 5G.  It contains all files of 3GPP Release 17.All cards ship with factory-default unique IMSI and a card-individual random K + OPC.  The 2G SIM, USIM and ISIM authentication algorithm is set to MILENAGE.One specific advantage of this card is its fully re-programmable nature, where the user can create/edit any files and directories (EF or DF) in the card filesystem.sysmoISIM-SJA5 supports (bold is new compared to SJA2):GSM Authentication: XOR-2G, COMP128v1, COMP128v2 and COMP128v3, MILENAGE (default)UMTS Authentication: XOR-3G, MILENAGE (default), TUAKFixed ICCID (not programmable/writable!)Programmable IMSIProgrammable MSISDNProgrammable Ki / K / OP or OPc (OPc default)GSM TS 11.11 compatibility200 kBytes remaining/free flashJava enabled (Card Manager, OTA, STK/SAT)Card-individual ADM keyCard-individual OTA keys (3DES default, AES optional)For more information on the sysmoISIM-SJA5, please see the sysmoISIM-SJA5 User ManualThe key material will be sent (at the time of shipping) by e-mail to the address submitted during the order/checkout process.NOTICE: This product is for operators of public or private mobile networks and the research community.  As a regular subscriber of mobile networks, you cannot clone another identity to this card, as you do not know the secret identity (Ki) of your original card!Custom printing available in quantities > 1000 units.The cards all ship with an IMSI in the MCC-MNC of 999-70 (MCC 999 is reserved by ITU for private cellular networks). You can of course modify the IMSI like all other parts of this card to whatever is your requirement.

€80.92*
Professional SIM card adapter (plug-in, micro, nano SIM to full-size)
This is a professional adapter to insert ID-001 (plug-in, 2FF) SIM cards or micro SIM (3FF) or nano SIM (4FF) cards into a full-sized card reader slot.

€14.28*
sysmoEUICC1 eUICC for consumer eSIM RSP
The sysmoEUICC1-C2x is an eUICC for use within the consumer eSIM systemThe eUICC (embedded Universal Integrated Chip Card) is the hardware component typically soldered onto the circuit board of a UE (User Equipment, the term 3GPP uses for a phone/modem). It is the physical component onto which the purely logical/virtual eSIM [profiles] are installed.The sysmoEUICC-C2x is packaged in the traditional plastic card form factor of SIM/UICC cards. It is a so-called seamless cut, allowing for a single card to be used in full (credit card) size, as well as 2FF (mini-SIM), 3FF (micro-SIM) or 4FF (nano-SIM). This form-factor is useful primarily in that: it can be used to eSIM-enable devices that have a traditional SIM card slot, and no built-in/on-board eUICCit can be used during research, development and testing; for example by inserting it into a smart-card reader that is attached to a computerFor more details, please see the product user manual.Overview of Variants VariantSystemForm-FactorCertificates sysmoEUICC1-C2GConsumer2FF/3FF/4FFGSMA sysmoEUICC1-C2TConsumer2FF/3FF/4FFSGP.26 Test

€23.80*
SIMtrace2 Hardware Kit
The Osmocom SIMtrace2 hardware enables you to capture and monitor communication between a mobile phone and its SIM or USIM card.The SIMtrace2 Hardware Kit consists of the following parts:the SIMtrace Device itselfa USB A to mini-B cablea set of four flexible PCB SIM adapters for 2FF SIM card size, one in each orientationThe flexible PCB adapter cables for 3FF (micro) and 4FF (nano) SIM card slots are NOT included in the kit.  If you require it, please order them as separate items.Full schematics, gerber files, firmware source code and host PC software source code can be found at https://osmocom.org/projects/simtrace2 .Please note that sysmocom is merely offering the fully assembled/tested/manufactured SIMtrace hardware to you.  The software is a community-driven OpenSource project, and at the low cost of this item, we cannot provide you with free software support or any type of warranty on software functionality.Please note that we strongly advise against the use of virtual machines with USB pass-through for the SIMTrace2.  This often messes up the rather strict timing requirements and introduces instability.  Please understand that we cannot accept bug reports for bugs observed in setups involving VMs.

€101.15*
Omnikey CardMan 3121 USB CCID interface
The Omnikey CardMan 3121 is a USB smart card interface device. Colloquially these devices are also called "Card Reader", despite the fact that they can read and write as far as permitted by the card used.It is compatible with the USB CCID class device specification and can be used without any vendor drivers by Free / Open Source software such as libccid and OpenCT.  Having said that, it of course also works with vendor-supplied PC/SC drivers on Windows, as well as Mac OS X.The Omnikey CardMan 3121 offers a single full-sized card slot. So please make sure to obtain a mechanical adapter separately if you want to use it with plug-in sized SIM cards.

€35.70*
SIMtrace nanoSIM (4FF) FPC Cable, FPC opposite cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
sysmoISIM-SJA5-S17 SIM + USIM + ISIM Card (10-pack) with ADM keys; S17 chip for SUCI-in-USIM
Smart Card Chip: S17
This is a bundle of 10 cards.The sysmoISIM-SJA5 is a standards-compliant GSM SIM + UMTS USIM + IMS/VoLTE ISIM card.  It has a triple-cut form factor, fitting 2FF (classic SIM), 3FF (micro SIM) and 4FF (nano SIM).It is intended to be used in sysmoNITB / Osmocom based cellular networks, but can be used with any core network, from GSM (2G) through UMTS (3G) and LTE (4G) as well as 5G.  It contains all files of 3GPP Release 17.All cards ship with factory-default unique IMSI and a card-individual random K + OPC.  The 2G SIM, USIM and ISIM authentication algorithm is set to MILENAGE.One specific advantage of this card is its fully re-programmable nature, where the user can create/edit any files and directories (EF or DF) in the card filesystem.sysmoISIM-SJA5 supports (bold is new compared to SJA2):GSM Authentication: XOR-2G, COMP128v1, COMP128v2 and COMP128v3, MILENAGE (default)UMTS Authentication: XOR-3G, MILENAGE (default), TUAKFixed ICCID (not programmable/writable!)Programmable IMSIProgrammable MSISDNProgrammable Ki / K / OP or OPc (OPc default)GSM TS 11.11 compatibility200 kBytes remaining/free flashJava enabled (Card Manager, OTA, STK/SAT)Card-individual ADM keyCard-individual OTA keys (3DES default, AES optional)For more information on the sysmoISIM-SJA5, please see the sysmoISIM-SJA5 User ManualThe key material will be sent (at the time of shipping) by e-mail to the address submitted during the order/checkout process.NOTICE: This product is for operators of public or private mobile networks and the research community.  As a regular subscriber of mobile networks, you cannot clone another identity to this card, as you do not know the secret identity (Ki) of your original card!Custom printing available in quantities > 1000 units.The cards all ship with an IMSI in the MCC-MNC of 999-70 (MCC 999 is reserved by ITU for private cellular networks). You can of course modify the IMSI like all other parts of this card to whatever is your requirement.

Variants from €80.92*
€95.20*
SIMtrace nanoSIM (4FF) FPC Cable, FPC on cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
Omnikey CardMan 6121 USB CCID interface (2FF sized)
The Omnikey CardMan 6121 is a USB smart card interface device directly for the plug-in type (2FF sized) SIM card. Colloquially these devices are also called "Card Reader", despite the fact that they can read and write as far as permitted by the card used.It is compatible with the USB CCID class device specification and can be used without any vendor drivers by Free / Open Source software such as libccid and OpenCT.  Having said that, it of course also works with vendor-supplied PC/SC drivers on Windows, as well as Mac OS X.The Omnikey CardMan 6121 offers a single 2FF card slot. If you need a reader for a full-sized chip card, please check the Omnikey CardMan 3121 as alternative.

€35.70*
SIMtrace nanoSIM (4FF) FPC Cable, right angle, FPC opposite cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
SIMtrace microSIM (3FF) FPC Cable, FPC opposite cut corner side
This is a single microSIM (3FF) FPC Adapter to be used with the SIMtrace hardware. The orientation of the SIMcard can be seen on the product image. In case you require another orientation, please contact us and tell us which orientaton you require and for which phone that is needed. NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.This FPC adapter has the FPC attached opposite to the cut corner side of the 3FF SIM shape.

€17.85*
SIMtrace nanoSIM (4FF) FPC Cable, right angle, FPC on cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
SIMtrace microSIM (3FF) FPC Cable, FPC on cut corner side
This is a single microSIM (3FF) FPC Adapter to be used with the SIMtrace hardware. The orientation of the SIMcard can be seen on the product image. In case you require another orientation, please contact us and tell us which orientaton you require and for which phone that is needed. NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€17.85*
MFF2 ZIF M2M SIM card eUICC to FPC adapter
In the M2M/IoT industry, the ETSI MFF2 (Machine Form Factor) SIM, is gaining momentum.  As opposed to regular SIMs, this type of sim is not user-removable, but soldered into the GSM-enabled product.This MFF2 SIM is sometimes also called VQFN8 SIM or SON-8 SIM.When debugging or analyzing problems with such MFF2 SIM, they cannot be directly used with regular phones, test mobiles or SIM protocol tracers like our SIMtrace product.However, using this adapter and our FPC SIM adapters, it is possible to use a ETSI MFF2 solder-type SIM with a card reader or mobile phone that has a plug-in sized (ID-000) SIM card slot.Please note that this adapter is only the PCB adapter with a MFF2 footprint ZIF socket and the FPC connector.  No FPC SIM cable is included, and no MFF2 SIM is included!You will have to obtain the FPC SIM cables separately.  If you already have a SIMtrace including the adapters, you can use them with this product.Any ETSI MFF2 compliant solder-type SIM can be soldered onto this adapter and used in regular mobile phones.

€107.10*
SIMtrace Smart Card FPC Cable (full size)
This is an adapter that enables the use of the SIMtrace with a full-size smart card reader.This way you can use SIMtrace to trace communication of arbitrary smart cards, not just SIM cards as used in cellular technologies with their 2FF/3FF/4FF form factor.The product includesCircuit board assembly fitting into a full-sized smart card slot, with FPC connector soldered10cm (4") FFC cable to interconnect the circuit board to the SIMtrace

€21.42*
SIMtrace replacement FPC cables
In case you have lost or damaged your set of SIMtrace FPC adapter cables, you can now order them separately.This item is a kit of four 2FF Mini SIM card flexi PCB adapters. There is one adapter for each possible orientation of the SIM card, as shown on the picture.

€35.70*
Full-size-SIM card to FPC adapter
With this adapter and our FPC SIM adapters, it is possible to use a full-sized SIM/Smart Card inside a mobile phone with a plug-in sized (ID-000) SIM card slot.Please note that this adapter is only the full-size SIM card slot with the FPC socket.  No FPC SIM cable is included!You will have to obtain the FPC SIM cables separately.  If you already have a SIMtrace including the adapters, you can use them with this product.

€23.80*
MFF2 solder M2M SIM card to FPC adapter (10-pack)
In the M2M industry, the ETSI MFF2 (Machine Form Factor) SIM, is gaining momentum.  As opposed to regular SIMs, this type of sim is not user-removable, but soldered into the GSM-enabled product.This MFF2 SIM is sometimes also called VQFN8 SIM or SON-8 SIM.When debugging or analyzing problems with such MFF2 SIM, they cannot be directly used with regular phones, test mobiles or SIM protocol tracers like our SIMtrace product.However, using this adapter and our FPC SIM adapters, it is possible to use a ETSI MFF2 solder-type SIM with a mobile phone that has a plug-in sized (ID-000) SIM card slot.Please note that this adapter is only the PCB adapter with a MFF2 footprint and the FPC connector.  No FPC SIM cable is included, and no MFF2 SIM is included!You will have to obtain the FPC SIM cables separately.  If you already have a SIMtrace including the adapters, you can use them with this product.Any ETSI MFF2 compliant solder-type SIM can be soldered onto this adapter and used in regular mobile phones.This is a 10-pack, i.e. one pack consists 10 adapter PCBA.

€23.80*
sysmoOCTSIM evaluation kit
The sysmoOCTSIM is an eight-slot smart card reader printed circuit board assembly (PCBA) with USB-CCID interface. Targeted users are system integrators who use the sysmoOCTSIM to build their own products, such as SIM banks for cellular network quality monitoring or roaming testing. Multiple SIM cards connected to a single USB port / USB host can be used in a variety of applications, such as least-cost routing of voice, SMS or data services to different cellular networks of different operators remotely deployed systems for automatic remote roaming probes, providing roaming testing services to operators – particularly in combination with the remote SIM functionality. remotely deployed systems for service / QoS testing of cellular networks test equipment for interoperability, load and functional testing of cellular infrastructure equipment.The complete sysmoOCTSIM firmware and bootloader are developed by sysmocom as Free / Open Source Software (FOSS) and can be found at https://gitea.osmocom.org/sim-card/osmo-ccid-firmware and https://gitea.osmocom.org/electronics/osmo-asf4-dfu, respectively. Evaluation KitThe Evaluation Kit (EVK) is intended for your to evaluate the product for your project, before placing any quantity orders at related project quantity pricing at sysmocom.It consists of:sysmoQMOD printed circuit board assemblyanodized aluminium enclosureSIM card drawers/trays2FF to 3FF/4FF adapters12V desktop power supply10x sysmoISIM-SJA5 USIM/ISIM cards (w/o ADM keys)USB Stick with manual and SIM card dataFurther ReadingProduct HomepageData Sheet

€595.00*
sysmoISIM-SJA2 SIM/USIM/ISIM MFF2 solder-type (10-pack) with ADM keys
This is a bundle of 10 solder-type SIM/USIM/ISIM chips in ETSI MFF2 form-factor.The sysmoISIM-SJA2 is a standards-compliant GSM SIM + UMTS USIM + IMS/VoLTE ISIM card.  It has a solder-type MFF2 form-factor.It is intended to be used in sysmoNITB / Osmocom based cellular networks, but can be used with any core network, from GSM (2G) through UMTS (3G) and LTE (4G) as well as 5G.All cards ship with factory-default unique IMSI and a card-individual random K + OPC.  The 2G SIM, USIM and ISIM authentication algorithm is set to MILENAGE.One specific advantage of this card is its fully re-programmable nature, where the user can create/edit any files and directories (EF or DF) in the card filesystem.sysmoISIM-SJA2 supports:GSM Authentication: COMP128v1, COMP128v2 and COMP128v3, MILENAGE (default)UMTS Authentication: MILENAGE (default)Fixed ICCID (not programmable/writable!)Programmable IMSIProgrammable MSISDNProgrammable Ki / K / OP or OPC (OPC default)GSM TS 11.11 compatibility64kByte flash sizeJava enabled (Card Manager, OTA, STK/SAT)Card-individual ADM keyCard-individual OTA keys (3DES)For more information on the sysmoISIM-SJA2, please see the sysmoISIM-SJA2 User ManualThe key material will be sent (at the time of shipping) by e-mail to the address submitted during the order/checkout process.NOTICE: This product is for operators of public or private mobile networks and the research community.  As a regular subscriber of mobile networks, you cannot clone another identity to this card, as you do not know the secret identity (Ki) of your original card!Custom printing available in quantities > 1000 units.From September 2021 onwards, the cards currently all ship with an IMSI in the MCC-MNC of 999-70. The MCC 999 is reserved by ITU for private cellular networks.Before September 2021, our cards used 901-70, an allocated-but-unused range several years ago.  However, this range has recently been re-allocated by ITU to an operator (Clementvale Baltic OY). Subsequently we changed to 999-70.

€59.50*
Half-Size to Full-Size SIM card adapter
As the half-size form-factor for new  SIM cards is becoming more and more widespread, it is often difficult to insert those cards into many existing smart card readers - their slot is simply too deep for a card that only has half the regular card length.We are providing this adapter as a work-around: Its slot is very shallow, so you can comfortably insert and remove the half-size card, while the adapter os long enough to fit even into the deepest smart card readers (such as those bult into business laptops).

€14.28*
New
sysmoEUICC1 eUICC for consumer eSIM RSP in MFF2 (10-pack)
The sysmoEUICC1-CMx is a solder-type eUICC for use within the consumer eSIM system.This product is a 10-pack, containing 10 units as MFF2 chips on cut tapeThe eUICC (embedded Universal Integrated Chip Card) is the hardware component typically soldered onto the circuit board of a UE (User Equipment, the term 3GPP uses for a phone/modem). It is the physical component onto which the purely logical/virtual eSIM [profiles] are installed.The sysmoEUICC-CMx is packaged in the ETSI MFF2 form-factor for soldering.For more details, please see the product user manual.Note that the pricing reflects the "sample quantity" nature of this product in the webshop. For bulk volume orders, significant discounts apply.  Please reach out to sales@sysmocom.de if you'd like to order bulk volumes of this productOverview of Variants VariantSystemForm-FactorCertificates sysmoEUICC1-CMGConsumerMFF2GSMA sysmoEUICC1-CMTConsumerMFF2SGP.26 Test

€297.50*
New
sysmoISIM-SJA5 SIM/USIM/ISIM MFF2 solder-type (10-pack) with ADM keys
This is a bundle of 10 solder-type SIM/USIM/ISIM chips in ETSI MFF2 form-factor.The sysmoISIM-SJA5 is a standards-compliant GSM SIM + UMTS USIM + IMS/VoLTE ISIM card.  It has a solder-type MFF2 form-factor.It is intended to be used in sysmoNITB / Osmocom based cellular networks, but can be used with any core network, from GSM (2G) through UMTS (3G) and LTE (4G) as well as 5G. It contains all files of 3GPP Release 17. All cards ship with factory-default unique IMSI and a card-individual random K + OPc.  The 2G SIM, USIM and ISIM authentication algorithm is set to MILENAGE.One specific advantage of this card is its fully re-programmable nature, where the user can create/edit any files and directories (EF or DF) in the card filesystem.sysmoISIM-SJA5 supports:GSM Authentication: XOR-2G, COMP128v1, COMP128v2 and COMP128v3, MILENAGE (default)UMTS Authentication: XOR-3G, MILENAGE (default), TUAKFixed ICCID (not programmable/writable!)Programmable IMSIProgrammable MSISDNProgrammable Ki / K / OP or OPC (OPc default)GSM TS 11.11 compatibility200 kByte remaining/free flashJava enabled (Card Manager, OTA, STK/SAT)Card-individual ADM keyCard-individual OTA keys (3DES, AES optional)For more information on the sysmoISIM-SJA5, please see the sysmoISIM-SJA5 user manualThe key material will be sent (at the time of shipping) by e-mail to the address submitted during the order/checkout process.NOTICE: This product is for operators of public or private mobile networks and the research community.  As a regular subscriber of mobile networks, you cannot clone another identity to this card, as you do not know the secret identity (Ki) of your original card!The cards all ship with an IMSI in the MCC-MNC of 999-70 (MCC 999 is reserved by ITU for private cellular networks). You can of course modify the IMSI like all other parts of this card to whatever is your requirement.

€119.00*