M.2 modem carrier with remote SIM / tracing
Product information "M.2 modem carrier with remote SIM / tracing"
This is v2 of the SIM tracing and remote-SIM capable break-out board for M.2 (NGFF) type cellular / WWAN modems, such as modern LTE/LTE-A and 5G modems.
It allows you to insert a M.2 modem of 3042 and 3052 size types from any vendor, and it will provide you with:
- micro USB B 3 socket for connection of modem to a USB Host (like your PC/Laptop or Embedded System)
- mini USB B socket for connection of on-board SAM3S controller to a USB host
- 5V - 12V DC input for power supply (USB supply usually insufficient for a modem)
- PCM/I2S M.2 pins on a 2.54mm break-out header
- SIM card slot for a 2FF-sized SIM, USIM or RUIM card
- Jumpers to control PERST, W_DIS and GPS_DIS lines of modem
- on-board SAM3S microcontroller for SIMtrace and cardem / remote SIM operation
The board is basically a combination of the ngff-breakout board with a SIMtrace2 board inserted between the on-board modem and the on-board SIM slot.
Particularly the break-out header is useful to get access to various signals exported in a non-standard fashion by some modem models, such as digital audio PCM.
The product does not include an AC/DC power supply nor SIM cards or a M.2/NGFF modem. Please see below product links should you want a power supply and/or USB cable included:
You can find more information about this open hardware project at https://projects.osmocom.org/projects/ngff-cardem/wiki/Wiki
- sysmocom product page
- Data Sheet (PDF)
- Manual (PDF)
- git repository with all design files
- schematics (PDF)
- component placement (PDF)
- BOM (gnumeric)
All parts on this board are rated for full industrial temperature range (-40..85 Centigrade), although no environmental testing at extreme temperatures has been performed.
Login
5V PSU
This is an AC power cable with an IE320 - C7 plug (for C8 sockets) on the device side, and an EU/European plug for the wall-outlet side. The length is 1.3m.It is compatible with the sysmoBTS 1002 power supply and can be used as a spare part.
This is an AC power cable with an IE320 - C7 plug (for C8 sockets) on the device side, and an US plug for the wall-outlet side. The length is 1.3m.It is compatible with the sysmoBTS 1002 power supply and can be used as a spare part.
This is a desktop-type AC power suppy for 5V DC / 3A output.It is a suitable as a replacement part for the following products:sysmoBTS 1002 (indoor version)But can of courase also be used as accessory for other products likeminiPCIe breakout boardM.2 modem carrier with remote SIM / tracingNOTE: There is no primary AC cable included, please provide one yourself or check the accessories listed below under C7 cablesAC Input100-240V AC, +/-10%, 47-63 HzInput Currrent100V AC: 0.45AInrush currentlimited to 60A peakInput FuseInternal Fuse 3.15A, 250V ACEfficiencyMeets EISA2007, CEC Efficiency Level V,EU (EC) No 278/2009 Phase IOutput Voltage5VOutput Current3A (max)Output Ripple50mV peak-peak (max)MTBF100,000 hours (calculated)Operating Temperature0 to 40 centigrade, no deratingOutput Connector2.5mm barrel type, center contact +Output Cable1.5m +/- 5cmInput ConnectorICE320 - C8