We ship only once per week (see FAQ)!
welcome to the sysmocom webshop!
Only UPS shipping available
welcome to the sysmocom webshop

SIMtrace2 Hardware Kit

€101.15*

Product number: simtrace2-kit
Product information "SIMtrace2 Hardware Kit"

The Osmocom SIMtrace2 hardware enables you to capture and monitor communication between a mobile phone and its SIM or USIM card.


The SIMtrace2 Hardware Kit consists of the following parts:

  • the SIMtrace Device itself
  • a USB A to mini-B cable
  • a set of four flexible PCB SIM adapters for 2FF SIM card size, one in each orientation

The flexible PCB adapter cables for 3FF (micro) and 4FF (nano) SIM card slots are NOT included in the kit.  If you require it, please order them as separate items.

Full schematics, gerber files, firmware source code and host PC software source code can be found at https://osmocom.org/projects/simtrace2 .

Please note that sysmocom is merely offering the fully assembled/tested/manufactured SIMtrace hardware to you.  The software is a community-driven OpenSource project, and at the low cost of this item, we cannot provide you with free software support or any type of warranty on software functionality.

Please note that we strongly advise against the use of virtual machines with USB pass-through for the SIMTrace2.  This often messes up the rather strict timing requirements and introduces instability.  Please understand that we cannot accept bug reports for bugs observed in setups involving VMs.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


SIM FPC cables

SIMtrace microSIM (3FF) FPC Cable, FPC on cut corner side
This is a single microSIM (3FF) FPC Adapter to be used with the SIMtrace hardware. The orientation of the SIMcard can be seen on the product image. In case you require another orientation, please contact us and tell us which orientaton you require and for which phone that is needed. NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€17.85*
SIMtrace microSIM (3FF) FPC Cable, FPC opposite cut corner side
This is a single microSIM (3FF) FPC Adapter to be used with the SIMtrace hardware. The orientation of the SIMcard can be seen on the product image. In case you require another orientation, please contact us and tell us which orientaton you require and for which phone that is needed. NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.This FPC adapter has the FPC attached opposite to the cut corner side of the 3FF SIM shape.

€17.85*
SIMtrace nanoSIM (4FF) FPC Cable, FPC on cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
SIMtrace nanoSIM (4FF) FPC Cable, FPC opposite cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
SIMtrace nanoSIM (4FF) FPC Cable, right angle, FPC on cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
SIMtrace nanoSIM (4FF) FPC Cable, right angle, FPC opposite cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
SIMtrace replacement FPC cables
In case you have lost or damaged your set of SIMtrace FPC adapter cables, you can now order them separately.This item is a kit of four 2FF Mini SIM card flexi PCB adapters. There is one adapter for each possible orientation of the SIM card, as shown on the picture.

€35.70*
SIMtrace Smart Card FPC Cable (full size)
This is an adapter that enables the use of the SIMtrace with a full-size smart card reader.This way you can use SIMtrace to trace communication of arbitrary smart cards, not just SIM cards as used in cellular technologies with their 2FF/3FF/4FF form factor.The product includesCircuit board assembly fitting into a full-sized smart card slot, with FPC connector soldered10cm (4") FFC cable to interconnect the circuit board to the SIMtrace

€21.42*

simtrace-accesories

MFF2 ZIF M2M SIM card eUICC to FPC adapter
In the M2M/IoT industry, the ETSI MFF2 (Machine Form Factor) SIM, is gaining momentum.  As opposed to regular SIMs, this type of sim is not user-removable, but soldered into the GSM-enabled product.This MFF2 SIM is sometimes also called VQFN8 SIM or SON-8 SIM.When debugging or analyzing problems with such MFF2 SIM, they cannot be directly used with regular phones, test mobiles or SIM protocol tracers like our SIMtrace product.However, using this adapter and our FPC SIM adapters, it is possible to use a ETSI MFF2 solder-type SIM with a card reader or mobile phone that has a plug-in sized (ID-000) SIM card slot.Please note that this adapter is only the PCB adapter with a MFF2 footprint ZIF socket and the FPC connector.  No FPC SIM cable is included, and no MFF2 SIM is included!You will have to obtain the FPC SIM cables separately.  If you already have a SIMtrace including the adapters, you can use them with this product.Any ETSI MFF2 compliant solder-type SIM can be soldered onto this adapter and used in regular mobile phones.

€107.10*
MFF2 solder M2M SIM card to FPC adapter (10-pack)
In the M2M industry, the ETSI MFF2 (Machine Form Factor) SIM, is gaining momentum.  As opposed to regular SIMs, this type of sim is not user-removable, but soldered into the GSM-enabled product.This MFF2 SIM is sometimes also called VQFN8 SIM or SON-8 SIM.When debugging or analyzing problems with such MFF2 SIM, they cannot be directly used with regular phones, test mobiles or SIM protocol tracers like our SIMtrace product.However, using this adapter and our FPC SIM adapters, it is possible to use a ETSI MFF2 solder-type SIM with a mobile phone that has a plug-in sized (ID-000) SIM card slot.Please note that this adapter is only the PCB adapter with a MFF2 footprint and the FPC connector.  No FPC SIM cable is included, and no MFF2 SIM is included!You will have to obtain the FPC SIM cables separately.  If you already have a SIMtrace including the adapters, you can use them with this product.Any ETSI MFF2 compliant solder-type SIM can be soldered onto this adapter and used in regular mobile phones.This is a 10-pack, i.e. one pack consists 10 adapter PCBA.

€23.80*