This is a professional adapter to insert ID-001 (plug-in, 2FF) SIM cards or micro SIM (3FF) or nano SIM (4FF) cards into a full-sized card reader slot.

This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

This is a single microSIM (3FF) FPC Adapter to be used with the SIMtrace hardware. The orientation of the SIMcard can be seen on the product image. In case you require another orientation, please contact us and tell us which orientaton you require and for which phone that is needed. NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.This FPC adapter has the FPC attached opposite to the cut corner side of the 3FF SIM shape.

This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

This is a single microSIM (3FF) FPC Adapter to be used with the SIMtrace hardware. The orientation of the SIMcard can be seen on the product image. In case you require another orientation, please contact us and tell us which orientaton you require and for which phone that is needed. NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

In the M2M/IoT industry, the ETSI MFF2 (Machine Form Factor) SIM, is gaining momentum.  As opposed to regular SIMs, this type of sim is not user-removable, but soldered into the GSM-enabled product.  The MFF2 form-factor is also frequently used for all types of eUICCs within the GSMA  eSIM universe.This MFF2 SIM / eUICC is sometimes also called VQFN8 SIM or SON-8 SIM.When debugging or analyzing problems with such MFF2 SIM/eUICC, they cannot be directly used with regular phones, test mobiles or SIM protocol tracers like our SIMtrace product.However, using this adapter and our FPC SIM adapters, it is possible to use a ETSI MFF2 solder-type SIM/eUICC with a card reader or mobile phone that has a plug-in sized (ID-000) SIM card slot.Please note that this adapter is only the PCB adapter with a MFF2 footprint ZIF socket and the FPC connector.  No FPC SIM cable is included, and no MFF2 SIM is included!You will have to obtain the FPC SIM cables separately.  If you already have a SIMtrace including the adapters, you can use them with this product.Any ETSI MFF2 compliant solder-type SIM/eUICC can be soldered onto this adapter and used in regular mobile phones.

This is an adapter that enables the use of the SIMtrace with a full-size smart card reader.This way you can use SIMtrace to trace communication of arbitrary smart cards, not just SIM cards as used in cellular technologies with their 2FF/3FF/4FF form factor.The product includesCircuit board assembly fitting into a full-sized smart card slot, with FPC connector soldered10cm (4") FFC cable to interconnect the circuit board to the SIMtrace

With this adapter and our FPC SIM adapters, it is possible to use a full-sized SIM/Smart Card inside a mobile phone with a plug-in sized (ID-000) SIM card slot.Please note that this adapter is only the full-size SIM card slot with the FPC socket.  No FPC SIM cable is included!You will have to obtain the FPC SIM cables separately.  If you already have a SIMtrace including the adapters, you can use them with this product.

As the half-size form-factor for new  SIM cards is becoming more and more widespread, it is often difficult to insert those cards into many existing smart card readers - their slot is simply too deep for a card that only has half the regular card length.We are providing this adapter as a work-around: Its slot is very shallow, so you can comfortably insert and remove the half-size card, while the adapter os long enough to fit even into the deepest smart card readers (such as those bult into business laptops).

In the M2M industry, the ETSI MFF2 (Machine Form Factor) SIM, is gaining momentum.  As opposed to regular SIMs, this type of sim is not user-removable, but soldered into the GSM-enabled product.   The MFF2 form-factor is also frequently used for all types of eUICCs within the GSMA eSIM universe.This MFF2 SIM / eUICC form-factor is sometimes also called VQFN8 SIM or SON-8 SIM.When debugging or analyzing problems with such MFF2 SIM/eUICC, they cannot be directly used with regular phones, test mobiles or SIM protocol tracers like our SIMtrace product.However, using this adapter and our FPC SIM adapters, it is possible to use a ETSI MFF2 solder-type SIM/eUICC with a mobile phone that has a plug-in sized (ID-000) SIM card slot.Please note that this adapter is only the PCB adapter with a MFF2 footprint and the FPC connector.  No FPC SIM cable is included, and no MFF2 SIM is included!You will have to obtain the FPC SIM cables separately.  If you already have a SIMtrace including the adapters, you can use them with this product.Any ETSI MFF2 compliant solder-type SIM can be soldered onto this adapter and used in regular mobile phones.This is a 10-pack, i.e. one pack consists 10 adapter PCBA.

Sometimes you are developing / researching / debugging an embedded device that has its SIM or eUICC in MFF2 form-factor soldered to the circuit board.  This makes it very hard toswap/replace the physical SIM / eUICC for testinguse our SIMtrace2 product for protocol tracing use our SIMtrace2 product for card emulation or remote SIM use Using this flex adapter cable, you can remove the MFF2 pacakge from the circuit board, and solder one end to the board instead of the MFF2 chip. On the other end, it exposes a 6-pos FPC connector compatible withour SIMtrace2 productthe FPC to full-size card slot adapterthe ZIF socket MFF2 chip to FPC socket adapterthe solder-type MFF2 chip to FPC socket adapterWe expect this new product to be available around February 1st, 2025.