We ship only once per week (see FAQ)!
sysmocom webshop CLOSED (moving office) April 6 - 20, 2024!
Only UPS shipping available
sysmocom webshop CLOSED (moving office) April 6 - 20, 2024!
Filter
sysmoISIM-SJA2 SIM + USIM + ISIM Card (10-pack) with ADM keys
THIS PRODUCT IS END OF LIFE AND HAS BEEN REPLACED BY sysmoISIM-SJA5for a detailed changelog how SJA5 differs from SJA2, see the chapter "Changelog" in the sysmoISIM-SJA5 user manualThis is a bundle of 10 cards.The sysmoISIM-SJA2 is a standards-compliant GSM SIM + UMTS USIM + IMS/VoLTE ISIM card.  It has a triple-cut form factor, fitting 2FF (classic SIM), 3FF (micro SIM) and 4FF (nano SIM).It is intended to be used in sysmoNITB / Osmocom based cellular networks, but can be used with any core network, from GSM (2G) through UMTS (3G) and LTE (4G) as well as 5G.  It contains all files of 3GPP Release 16.All cards ship with factory-default unique IMSI and a card-individual random K + OPC.  The 2G SIM, USIM and ISIM authentication algorithm is set to MILENAGE.One specific advantage of this card is its fully re-programmable nature, where the user can create/edit any files and directories (EF or DF) in the card filesystem.sysmoISIM-SJA2 supports:GSM Authentication: COMP128v1, COMP128v2 and COMP128v3, MILENAGE (default)UMTS Authentication: MILENAGE (default)Fixed ICCID (not programmable/writable!)Programmable IMSIProgrammable MSISDNProgrammable Ki / K / OP or OPC (OPC default)GSM TS 11.11 compatibility64kByte flash sizeJava enabled (Card Manager, OTA, STK/SAT)Card-individual ADM keyCard-individual OTA keys (3DES)For more information on the sysmoISIM-SJA2, please see the sysmoISIM-SJA2 User ManualThe key material will be sent (at the time of shipping) by e-mail to the address submitted during the order/checkout process.NOTICE: This product is for operators of public or private mobile networks and the research community.  As a regular subscriber of mobile networks, you cannot clone another identity to this card, as you do not know the secret identity (Ki) of your original card!THIS PRODUCT IS END OF LIFE AND HAS BEEN REPLACED BY sysmoISIM-SJA5

€80.92*
Professional SIM card adapter (plug-in, micro, nano SIM to full-size)
This is a professional adapter to insert ID-001 (plug-in, 2FF) SIM cards or micro SIM (3FF) or nano SIM (4FF) cards into a full-sized card reader slot.

€14.28*
SIMtrace2 Hardware Kit
The Osmocom SIMtrace2 hardware enables you to capture and monitor communication between a mobile phone and its SIM or USIM card.The SIMtrace2 Hardware Kit consists of the following parts:the SIMtrace Device itselfa USB A to mini-B cablea set of four flexible PCB SIM adapters for 2FF SIM card size, one in each orientationThe flexible PCB adapter cables for 3FF (micro) and 4FF (nano) SIM card slots are NOT included in the kit.  If you require it, please order them as separate items.Full schematics, gerber files, firmware source code and host PC software source code can be found at https://osmocom.org/projects/simtrace2 .Please note that sysmocom is merely offering the fully assembled/tested/manufactured SIMtrace hardware to you.  The software is a community-driven Open Soruce project, and at the low cost of this item, we cannot provide you with free software support or any type of warranty on software functionality.

€101.15*
Omnikey CardMan 3121 USB CCID interface
The Omnikey CardMan 3121 is a USB smart card interface device. Colloquially these devices are also called "Card Reader", despite the fact that they can read and write as far as permitted by the card used.It is compatible with the USB CCID class device specification and can be used without any vendor drivers by Free / Open Source software such as libccid and OpenCT.  Having said that, it of course also works with vendor-supplied PC/SC drivers on Windows, as well as Mac OS X.The Omnikey CardMan 3121 offers a single full-sized card slot. So please make sure to obtain a mechanical adapter separately if you want to use it with plug-in sized SIM cards.

€35.70*
sysmoISIM-SJA5 SIM + USIM + ISIM Card (10-pack) with ADM keys
Smart Card Chip: 9FV
This is a bundle of 10 cards.The sysmoISIM-SJA5 is a standards-compliant GSM SIM + UMTS USIM + IMS/VoLTE ISIM card.  It has a triple-cut form factor, fitting 2FF (classic SIM), 3FF (micro SIM) and 4FF (nano SIM).It is intended to be used in sysmoNITB / Osmocom based cellular networks, but can be used with any core network, from GSM (2G) through UMTS (3G) and LTE (4G) as well as 5G.  It contains all files of 3GPP Release 17.All cards ship with factory-default unique IMSI and a card-individual random K + OPC.  The 2G SIM, USIM and ISIM authentication algorithm is set to MILENAGE.One specific advantage of this card is its fully re-programmable nature, where the user can create/edit any files and directories (EF or DF) in the card filesystem.sysmoISIM-SJA5 supports (bold is new compared to SJA2):GSM Authentication: XOR-2G, COMP128v1, COMP128v2 and COMP128v3, MILENAGE (default)UMTS Authentication: XOR-3G, MILENAGE (default), TUAKFixed ICCID (not programmable/writable!)Programmable IMSIProgrammable MSISDNProgrammable Ki / K / OP or OPc (OPc default)GSM TS 11.11 compatibility200 kBytes remaining/free flashJava enabled (Card Manager, OTA, STK/SAT)Card-individual ADM keyCard-individual OTA keys (3DES default, AES optional)For more information on the sysmoISIM-SJA5, please see the sysmoISIM-SJA5 User ManualThe key material will be sent (at the time of shipping) by e-mail to the address submitted during the order/checkout process.NOTICE: This product is for operators of public or private mobile networks and the research community.  As a regular subscriber of mobile networks, you cannot clone another identity to this card, as you do not know the secret identity (Ki) of your original card!Custom printing available in quantities > 1000 units.The cards all ship with an IMSI in the MCC-MNC of 999-70 (MCC 999 is reserved by ITU for private cellular networks). You can of course modify the IMSI like all other parts of this card to whatever is your requirement.

€80.92*
SIMtrace nanoSIM (4FF) FPC Cable, FPC opposite cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
SIMtrace nanoSIM (4FF) FPC Cable, FPC on cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
Omnikey CardMan 6121 USB CCID interface (2FF sized)
The Omnikey CardMan 6121 is a USB smart card interface device directly for the plug-in type (2FF sized) SIM card. Colloquially these devices are also called "Card Reader", despite the fact that they can read and write as far as permitted by the card used.It is compatible with the USB CCID class device specification and can be used without any vendor drivers by Free / Open Source software such as libccid and OpenCT.  Having said that, it of course also works with vendor-supplied PC/SC drivers on Windows, as well as Mac OS X.The Omnikey CardMan 6121 offers a single 2FF card slot. If you need a reader for a full-sized chip card, please check the Omnikey CardMan 3121 as alternative.

€35.70*
SIMtrace nanoSIM (4FF) FPC Cable, right angle, FPC opposite cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
SIMtrace microSIM (3FF) FPC Cable, FPC opposite cut corner side
This is a single microSIM (3FF) FPC Adapter to be used with the SIMtrace hardware. The orientation of the SIMcard can be seen on the product image. In case you require another orientation, please contact us and tell us which orientaton you require and for which phone that is needed. NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.This FPC adapter has the FPC attached opposite to the cut corner side of the 3FF SIM shape.

€17.85*
1090 MHz cavity filter for Mode-S / ADS-B
Data SheetThis is a cavity filter for 1090 MHz Mode-S / ADS-B.You can use it to attenuate any out-of-band interference while receiving ADS-B / Mode-S. It will attenuate any transmissions from the nearby 900 MHz GSM band by 80 dB.Both connectors are SMA (female). It is not suitable for outdoor environments.It can support up to 30W of RF power and has the following characteristics: 1090 MHz ADS-B Cavity FilterPass Band1086 - 1094 MHzInsertion Loss<= 1.0 dBPassband Ripple0.2 dBRejection80 dB @ 921-960 MHz (GSM 900)VSWR<= 1.20Impedance50 OhmsPower30 W average RF power (max)Temperature-10 to 50 CentigradeDimensions54x54x45 mmWeight200 gIP-RatingIP50

€47.60*
SFP breakout board v1 kit
The Osmocom SFP breakout board is exactly what the name implies: A small break-out board for transceivers in SFP form factor.You can use it for e.g.transmitting your own signals / waveforms (not restricted to Ethernet or CPRI) over fiber optics. This is e.g. useful if you need galvanic isolation between digital circuits, or need long-distance transmission e.g. between FPGA LVDS interfaces.attach some I2C adapter to the I2C pins of the SFP module in order to re-program itThe SFP transceivers exhibit a symmetric/differencial interface for Rx and Tx. Each of them is exposed as a pair of SMA connectors, using differential traces between the SMA connectors and the transceiver module.If you're interested in transmitting single-ended signals, please see the sfp-experimenter board instead. It's like the SFP breakout board, but contains differential transmitter + receivers.Homepage (includes links to schematics, design files, ...): http://osmocom.org/projects/misc-hardware/wiki/Sfp-breakout This kit includes:Assembled sfp-breakout board (PCB Assembly) like visible on the product pictures4x edge-launch SMA connectors which you still need to solder (very basic soldering skills required)No actual SFP transceiver module is included. You should be able to use any module compatible with the SFP Multi-Source Agreement.

€65.45*
868 (863..870) MHz cavity filter (ISM, LoRa, SigFox, Helium)
Data SheetThis is a cavity filter for the 868 MHz ISM band, used by LoRA, SigFox and many other narrow-band IoT technologies.You can use it to attenuate any out-of-band interference. It will attenuate transmissions from nearby cellular band.Both connectors are SMA (female). It is not suitable for outdoor environments.It can support up to 30W of RF power and has the following characteristics: 868 MHz ISM Cavity FilterPass Band863 - 870 MHzInsertion Loss<= 1.0 dBPassband Ripple0.2 dBRejection>= 40 dB @ 833 MHz; >= 44 dB @ 903 MHzVSWR<= 1.20Impedance50 OhmsPower30 W average RF power (max)Temperature-10 to 50 CentigradeDimensions54x54x45 mmWeight220 gIP-RatingIP50

€53.55*
HPE FlexibleLOM PCIEx8 adapter DIY kit
Tobias "TobleMiner" Schramm designed an open source hardware adapter to make use of HPE FlexibleLOM adapters in normal, standard PCIe x8 slots.This is a parts kit consisting of the HPE-FlexibleLOM-adapter PCB and the matching PCIe x8 edge launch connector.The parts kit still needs to be assembled (soldered).This Kit uses the Rev A Design.More details, including the full (open source hardware) design files of this project can be found at https://github.com/TobleMiner/HPE-FlexibleLOM-adaptersysmocom is not involved in the design of this project. We merely make available the manufactured PCB and the matching connector to the interested hardware hacker/maker.NOTE: The PCB edge is not chamfered, as JLC PCB doesn't seem to do this for PCBs of that size, see https://github.com/TobleMiner/HPE-FlexibleLOM-adapter/issues/1

€7.14*
SIMtrace nanoSIM (4FF) FPC Cable, right angle, FPC on cut corner side
This is a single nanoSIM (4FF) FPC Adapter to be used with the SIMtrace hardware.NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€21.42*
SIMtrace microSIM (3FF) FPC Cable, FPC on cut corner side
This is a single microSIM (3FF) FPC Adapter to be used with the SIMtrace hardware. The orientation of the SIMcard can be seen on the product image. In case you require another orientation, please contact us and tell us which orientaton you require and for which phone that is needed. NOTE: Care must be taken when the FPC adapter is used with a tray, e.g. with an iPhone. When placing the FPC adapter into a tray, it is possible that the cable gets stuck on removal. We do not take responsibility for such events.

€17.85*
ATUSB IEEE 802.15.4 USB Adapter
The ATUSB is an open hardware IEEE 802.15.4 USB Adapter.It is based on the Atmel AT86RF231 transceiver and operates in the license-free 2.4 GHz band using the IEEE 802.15.4 physical and link layer. Note that IEEE 802.15.4 is different from IEEE 802.11 (WLAN) and IEEE 802.15.1 (Bluetooth).atusb can communicate at the physical and link layer with any device that implements the IEEE 802.15.4-2006 standard for the 2.4 GHz band.  They are fully supported by the Linux kernel WPAN project (see linux-wpan).For more information on atusb please see the atusb open hardware project homepageA PDF Rendering of the Schematics is available from here

€35.70*
SFP experimenter board v2 kit
The Osmocom SFP experimenter board a small circuit board for experiments with (usually fiber optical) transceivers in SFP form factor.You can use it for e.g.transmitting your own signals / waveforms (not restricted to Ethernet or CPRI) over fiber optics. This is e.g. useful if you need galvanic isolation between digital circuits, or need long-distance transmissionattach some I2C adapter to the I2C pins of the SFP module in order to re-program itThe SFP transceivers exhibit a symmetric/differencial interface for Rx and Tx. The sfp-experimenter board contains an on-board differential transmitter and receiver so you can transmit/receive normal single-ended signals.Project Homepage (includes links to schematics, design files, etc.): http://osmocom.org/projects/misc-hardware/wiki/Sfp-experimenterThis kit includesAssembled sfp-experimenter board (PCB Assembly) like visible on the product pictures2x edge-launch SMA connectors which you still need to solder (very basic soldering skills required)No actual SFP transceiver module is included. You should be able to use any module compatible with the SFP Multi-Source Agreement.NOTE: If you're interested in transmitting differential signals, please see the sfp-breakout board instead. It's like the SFP experimenter board, but contains no differential transmitter + receivers.

€65.45*
Sysmocom USB serial cable (CP2102) with 2.5mm stereo jack
This is a USB-Serial cable with a CP2102 based USB-Serial converter.  The cable exposes the UART at 3.3V CMOS levels on a 2.5mm stereo jack.This cable is also known as Motorola T191 cable, or as Osmocom-style UART cable.This cable can be used for establishing a connection between your PC and the UART in many devices, such asOsmocomBB-compatible phone (OpenMoko, Motorola C1xx, ...)SIMtrace debug UARTicE1usb debug UARTsysmoBTS 1002 serial consolemany other projects in the Osmocom universeThis cable supports non-standard baud-rates, it thus can be used for burst_ind branch.

€12.99*
MFF2 ZIF M2M SIM card eUICC to FPC adapter
In the M2M/IoT industry, the ETSI MFF2 (Machine Form Factor) SIM, is gaining momentum.  As opposed to regular SIMs, this type of sim is not user-removable, but soldered into the GSM-enabled product.This MFF2 SIM is sometimes also called VQFN8 SIM or SON-8 SIM.When debugging or analyzing problems with such MFF2 SIM, they cannot be directly used with regular phones, test mobiles or SIM protocol tracers like our SIMtrace product.However, using this adapter and our FPC SIM adapters, it is possible to use a ETSI MFF2 solder-type SIM with a card reader or mobile phone that has a plug-in sized (ID-000) SIM card slot.Please note that this adapter is only the PCB adapter with a MFF2 footprint ZIF socket and the FPC connector.  No FPC SIM cable is included, and no MFF2 SIM is included!You will have to obtain the FPC SIM cables separately.  If you already have a SIMtrace including the adapters, you can use them with this product.Any ETSI MFF2 compliant solder-type SIM can be soldered onto this adapter and used in regular mobile phones.

€107.10*
SIMtrace Smart Card FPC Cable (full size)
This is an adapter that enables the use of the SIMtrace with a full-size smart card reader.This way you can use SIMtrace to trace communication of arbitrary smart cards, not just SIM cards as used in cellular technologies with their 2FF/3FF/4FF form factor.The product includesCircuit board assembly fitting into a full-sized smart card slot, with FPC connector soldered10cm (4") FFC cable to interconnect the circuit board to the SIMtrace

€21.42*
SMA-male to SMA-male cable, RG402, rigid-flex, 20cm
This is a 20cm rigid-flex coaxial cable, RG402 type, terminated with male SMA connectors at both ends.Rigid-flex cables have outstanding screening efficiency compared to normal coaxial cabling, making them ideal in all applications requiring maximum isolation from the external RF environment, such as in test setups for mobile communications.

€5.95*
OpenVizsla v3.x USB Protocol Analyzer PCBA
This is  fully assembled and tested OpenVizsla v3.x (3.2, 3.3 or 3.4) USB protocol analyzer.OpenVizsla is a bus sniffer/analyzer for USB.  It allows you to passively monitor the communication between a USB host and USB periheral.  It supports USB low-speed, full-speed and high-speed.The product is shipped as a bare printed circuit board assembly, without any enclosure.For more information about OpenVizsla, see https://openvizsla.org/

€178.50*
S-Band cavity filter 2170-2300 MHz
Data sheetThis is a cavity band-pass filter for the 2170-2300 MHz S-Band, particularly useful in satellite receiver applicationsYou can use it to attenuate any out-of-band interference while receiving only the wanted band. It will attenuate any transmissions from the nearby 2.1 GHz cellular band by >= 30 dB.Both connectors are SMA (female). It is not suitable for outdoor environments.It can support up to 30W of RF power and has the following characteristics: S-Band Cavity FilterPass Band2170 - 2300 MHzInsertion Loss<= 1.0 dBPassband Ripple0.8 dBRejection30 dB @ < 2160 MHzVSWR<= 1.30Impedance50 OhmsPower30 W average RF power (max)Temperature-20 to 50 CentigradeDimensions124x47x33 mmWeight186 gIP-RatingIP50

€65.45*